Changzhou LongXiang Gas Spring Co.,Ltd

Correct storage protects a gas spring before it ever reaches the machine. Temperature extremes, moisture, damaged packaging and careless handling can affect the piston rod, seals and surface finish. LONGXIANG GAS SPRING recommends treating every unit as a precision component from delivery through final installation.

Keep Gas Springs Clean and Dry

Store unopened gas springs in a clean indoor area away from rain, condensation, grinding dust, welding spatter and chemical vapors. Keep the original packaging whenever possible because it protects the piston rod and end fittings from impacts. If cartons become wet, move the products to a dry location, inspect the packaging and replace damaged protective material.

Do not place loose gas springs directly on concrete floors. Use shelves, pallets or clean bins so moisture and dirt cannot collect around the cylinder. Stainless steel versions offer stronger corrosion resistance, but they still benefit from dry, controlled storage.

Control Temperature and Sunlight

A stable warehouse temperature is preferable to repeated hot-cold cycles. Avoid locations beside heaters, ovens, steam pipes or doors exposed to freezing weather. Direct sunlight can heat a carton far above the surrounding air temperature and may also age rubber or plastic accessories. For long storage periods, follow the temperature limits supplied with the product and contact the manufacturer when conditions are unusual.

Protect the Piston Rod

The chrome-plated piston rod must remain smooth. Scratches, dents, paint and adhesive residue can damage the seal during operation and cause leakage. Never use the rod as a lifting point, clamp it in a vice or place heavy objects on top of stored units. LONGXIANG GAS SPRING advises keeping end fittings separated so metal parts cannot strike adjacent rods during transport or stock handling.

Position, Stacking and Inventory

Keep units in their supplied orientation and packaging unless the application documentation states otherwise. Do not create high, unstable stacks that can collapse or bend brackets. Label cartons with part number, force rating, stroke, delivery date and application so installers select the correct unit.

Use first-in, first-out inventory control. Gas springs are sealed assemblies and do not require routine charging in storage, but extended shelf time should be recorded. If a product has been stored for a long period, compare its condition with a recently delivered unit and confirm the required force before installation.

Inspection Before Installation

Before mounting, check the cylinder for corrosion or dents, the rod for marks, and the end fittings for damage or looseness. Remove only clean protective packaging; do not polish the rod with abrasive material. Cycle the unit carefully in a controlled test fixture if your engineering procedure allows it. Never compress a gas spring by hand, strike it, heat it or puncture the cylinder.

For product options, visit the gas spring product range. If storage conditions, shelf time or force requirements are uncertain, share the application details through the contact page. LONGXIANG GAS SPRING can help confirm the correct product and handling method.

FAQ

Can gas springs be stored outdoors?

Outdoor storage is not recommended. Rain, condensation, dirt and sunlight can damage packaging and increase corrosion risk.

Should stored gas springs be lubricated?

Do not add grease or oil to the piston rod unless the manufacturer specifically instructs it. Extra lubricant can attract contamination or be incompatible with the seal.

What should I do after very long storage?

Inspect the unit, verify identification and force requirements, and ask the supplier about any application-specific test procedure before installation.

Good storage is simple: keep products dry, stable, identifiable and protected from impact. These steps help preserve reliable movement and service life from the first operating cycle. LONGXIANG GAS SPRING supports customers with selection, storage and installation guidance for industrial applications.